115Connecting to a ComputerConnecting to Televisions, Computers and PrintersAt the Nikon Transfer default settings, ViewNX starts automatically when transfer iscomplete and transferred pictures can be viewed.For more information on using Nikon Transfer or ViewNX, refer to help informationcontained in Nikon Transfer or ViewNX (A 116).Disconnecting the cameraDo not turn off the camera or disconnect the camera from the computer duringtransfer.When transfer is complete, turn off the camera and disconnect the USB cable.The camera turns off automatically if there is no communication with thecomputer for 30 minutes while the camera is connected via the USB cable.B Charging the BatteryThe charge lamp slowly blinks green while the battery inserted into the camera is charging (A 117).C Using a Card ReaderThe pictures stored on the memory card inserted into a card reader or similar device can also betransferred to the computer using Nikon Transfer.• If the memory card capacity is 2 GB or more, or if the memory card is SDHC-compliant, the cardreader or similar device must support these memory card specification.• Insert a memory card into the card reader or similar device, and refer to the steps 4 and 5 (A 114)to transfer pictures.• To transfer pictures stored in the camera’s internal memory to the computer, the pictures mustfirst be copied to a memory card using the camera (A 97).