23Step 1 Turn the Camera On and Select A (Auto) ModeBasic Photography and Playback: A (Auto) ModeIndicators Displayed in A (Auto) Mode• The indicators and photo info displayed during shooting and playback will turnoff after a few seconds (A 132).• When the monitor has turned off in standby mode to save power, press thefollowing button to reactivate it (A 137).- Power switch, the shutter-release button, or A buttonD Functions Available in A (Auto) Mode• The flash mode (A 30) can be adjusted and the self-timer (A 32), macro mode (A 33), and theexposure compensation (A 34) can be applied.• Press the d button to specify settings for all shooting menu items (A 36) according toshooting conditions.D Motion DetectionSee Motion detection (A 135) in the setup menu (A 125) for more information.D Electronic Vibration Reduction• When the flash mode (A 30) is set to W (off) or Y (slow sync) with Electronic VR (A 134) inthe setup menu set to Auto, the w icon may appear in the monitor.• The appearance of w indicates shooting conditions in which the effects of camera shake can bepronounced. In these situations, the camera reduces the effects of camera shake in pictures beforerecording them.1 11 1Shooting modeA displayed in A(auto) mode.Image modeThe combination of imagequality (compression) andimage size is displayed. Thedefault setting isL 4000×3000.Internal memory indicatorIndicates that images will be stored on thecamera’s internal memory (approximately 47 MB).When a memory card is inserted in the camera, Cdoes not appear and images will be stored on thememory card.Motion detection iconThe effects of the subjectmovement and camera shakeare reduced.
