134Setup MenuBasic Camera Setupw Electronic VRChoose whether or not electronic VR (vibration reduction) is used when taking stillpictures.When Auto is selected, R is displayed in the monitor (A 6), and electronic VR isapplied according to shooting conditions.B Notes on Electronic Vibration Reduction• Electronic VR does not function when the flash is used, except when slow sync mode is applied.Electronic VR does not function when slow sync with red-eye reduction (A 54, 55) is used.• Electronic VR does not function with exposures that exceed a certain length of time.• Electronic VR is activated only when ISO sensitivity (A 42) is set to Auto.• Electronic VR does not function when Blink proof (A 64) is set to On in smart portrait mode.• Electronic VR does not function in the following scene mode:- Sports (A 54)- Night portrait (A 54)- Dusk/dawn (A 55)- Night landscape (A 56)- Museum (A 57)- Fireworks show (A 58)- Backlight (A 58)• The effectiveness of electronic VR decreases as camera shake increases.• The picture taken using electronic VR may be somewhat “grainy” in appearance.D Electronic VR for MoviesTo compensate for camera shake with movie recording, enable Electronic VR (A 109) from themovie menu (A 108).d button M z (Setup menu) (A 126) M w Electronic VRw AutoElectronic VR is enabled and the effects of camera shake are reduced with shootingof still pictures when all of the following conditions are met.• The flash is turned off or set to slow sync mode.• A slow shutter speed is used.• The Continuous setting is set to Single• The subject is dark.Off (default setting)Electronic VR is disabled.
