Auto OffPress the MENUbutton -'_ _ icon -'_ Auto off -'_ _]_ buttonmenuWhen the camera is on and a period of time passes without any operations having beenperformed, the monitor will be turned offand the camera will enter standby mode ([]_]]25) tosave power. In this option, set the time allowed to elapse before the camera enters standbymode. 30 s, 1 rain (default setting), 5 min, or 30 min can be selected.[] When the Monitor Turns off for the Power Saving Function• Power on lamp flashes in standby mode.• Camera turns off after approximately three minutes passes in standby mode,• To reactivate the monitor while the power on lamp is flashing, press any of the following buttons:Power switch, shutter release button, O button, [] button or • ('_ movie record) button] Auto Off Settings• The time allowed to elapse before the camera enters standby mode is fixed in the followingsituations:When a menu is displayed: Three minutes minimum (or 5 rain or 30 rain, if these settings a reselected)During slide show playback: up to 30 minutesWhen the AC adapter EH 62G is connected: 30 minutesWhen an audio video cable is connected: 30 minutes• The camera does not enter standby mode when transferring images using an Eye Fi card,_-B794"t_