Eye-Fi UploadPress the MENUbutton "_ _ icon "_ -_ _) buttonmenu Eye-Fi upload_1_ Notes About Eye-Fi Cards• Note that images will not be uploaded if signal strength is insufficient even if Enable is selected,• Select Disable where wireless devices are prohibited.• Refer to the instruction manual of your Eye Fi card for more information, In the event ofmalfunction, contact the card manufacturer.• The camera can be used to turn Eye Fi cards on and off, but may not support other Eye Fifunctions.• The camera is not compatible with the endless memory function. When it is set on a computer,disable the function, if the endless memory function is enabled, the number of images taken maynot be displayed correctly,• Eye Fi cards are for use only in the country of purchase, Observe all local laws concerning wirelessdevices,• Leaving the setting as Enable will result in the battery being depleted in a shorter period of time,[] Eye-Fi Communication IndicatorThe communication status of the Eye Fi card in the camera can be confirmed in the monitor (_8).• _,: Eye-Fi upload is set to Disable.• _ (lights): Eye Fi upload enabled; waiting to begin upload,• _ (flashes): Eye Fi upload enabled; uploading data,• _: Eye Fi upload enabled but no images available for upload,• _: An error occurred, The camera cannot control the Eye Fi card._'_87