175Setup MenuBasic Camera SetupVibration ReductionChoose a vibration reduction option for shooting still images.Vibration reduction effectively reduces blur, caused by slight hand movementknown as camera shake, which commonly occurs when shooting with the camerazoomed in or at slow shutter speeds.Set Vibration reduction to Off when shooting still images while using a tripodto stabilize the camera.The current vibration reduction setting can be confirmed in the camera monitorwith shooting (A 6, 25, 140). When Off is selected, no icon is displayed.d button M z (Setup menu) (A 168) M Vibration reductionV On (hybrid)The effects of camera shake are corrected optically using an image sensor shiftmethod, and electronic vibration reduction is also used in the following situations toprocess images:• When the flash does not fire• When the shutter speed is slower than 1/60 seconds• When Self-timer is disabled• When images are not captured continuously (i.e., when images are captured oneat a time)• When ISO sensitivity is 200 or lowerg On (default setting)An image sensor shift method is used to reduce the effects of camera shake whencapturing still images.Camera automatically detects the panning direction and only corrects for vibrationdue to camera shake. When the camera is panned, for example, vibration reductionreduces only vertical shake. If the camera is tilted, vibration reduction affects onlyhorizontal shake.k OffVibration reduction is not enabled.D Vibration Reduction for MoviesVibration reduction for movie recording can be set with Electronic VR (A 151) in the movie menu(A 146).