110Wireless Transfer ModeSetting Up Wireless Transfer ModeUse the supplied Wireless Camera Setup Utility (hereafter Setup Utility) toconfigure your computer as a “profile device” in the camera. Before starting,see “Configuration Procedure” (P.112) for more information on configuringa profile device. The Wireless Camera Setup Utility/PictureProject In-staller CD (hereafter CD-ROM) supplied with the camera is requiredfor installation.Confirming the Type of ConfigurationWhen configuring the computer as a profile device using the Setup Utility, the type ofconfiguration based on the wireless LAN settings in your computer is displayed. Beforestarting the Setup Utility, consult the following table and select the type of configura-tion you will use.* Create an Ad-hoc (Camera to Computer) network profile cannot be selected if an infra-structure network has already been set up in your computer, or the fixed IP address is not169.254.x.x.Select the type of configuration after the Setup Utility verifies the wireless network set-tings in your computer. For more information, see “Configuration Procedure” (P.112).Type When to useCreate an Infrastructure(Access Point) networkprofileSelect when using the existing infrastructure network set-tings in your computer.Create Infrastructure(Access Point) andAd-hoc (Camera to Com-puter) network profileSelect when using multiple wireless networks.Create an Ad-hoc (Cam-era to Computer) net-work profileSelect when establishing a peer-to-peer connectionbetween the camera and computer. This type is recom-mended for first-time users of wireless networks.*Create Profile manuallySelect if your computer has a fixed IP address, does nothave a wireless network set up using Windows XP’s built-in wireless network features, runs Windows XP SP1, or isa Macintosh. This type is recommended for power users.
