81Advanced Camera Settings – The Shooting MenuRestrictions on Continuous Shooting• Settings other than Single cannot be used in combination with BSS (P.82), Auto bracketing orWB bracketing (P.83). The previous setting is used and the earlier setting is canceled.• Noise reduction (P.88) has no effect even if set to On.• With Continuous, Multi-shot 16, Ultra HS, and 5 shot buffer, settings for focus, exposure,and white balance are determined by the first shot in each series. The flash is automatically setto B (Flash Cancel).• Digital zoom (P.25) cannot be used at settings of Multi-shot 16 or Ultra HS.• When using the self-timer, Single is automatically set. The settings will return to the previoussetting after an image has been taken using the self-timer.Ultra HS• During shooting, progress is shown on the monitor, from S to E. To in-terrupt shooting before 100 pictures have been recorded, lift your fin-ger from the shutter-release button.• During shooting, pressing T while the y icon appears displays the de-lete confirmation dialog. From this screen, you can delete all the pic-tures in the same sequence.• During shooting, the shutter sound is off.5 Shot BufferIf Image size is set to c 3264×2448 or j 3264×2176 and Image quality is set to FINE, only thelast three images taken in a series will be recorded.Note on Interval Timer ShootingTo prevent shooting from ending unexpectedly, use the optional EH-62A AC adapter kit.Interval Timer Shooting• To save power, the monitor turns off and the power on lamp starts blinking between shots. Thedisplay turns on automatically immediately before the camera takes the next shot.• Do not rotate the mode dial during the interval between shots.
