86Advanced Camera Settings – The Shooting MenuUse this option to determine where the camera focuses.Focus Area Display• When the subject is in focus, the focus area will be outlined in green.• When the subject is out of focus, the focus area will blink red.• When AF area mode is set to Auto, the focus area will be displayed when the shutter-releasebutton is pressed halfway.AF Area Mode kl Auto(default setting)Automatically selects a focus point from 11focus areas containing the subject closestto the camera. The selected focus area isdisplayed when the shutter-release buttonis pressed halfway. This setting is usefulwhen taking snapshots or you do not havetime to check the focus.m ManualYou can select a focus point from 99 focusareas using the multi selector. This optioncan be used instead of AF lock (P.87) tofocus on a relatively motionless subject thatis not at the center of the frame.When Manual is selected, the focus areaand selectable area are displayed. Use themulti selector to move the focus area overthe desired subject.n CenterThe center focus area is used. This optioncan be used in combination with AF lock(P.87) to keep off-center subjects in focus.F2.7F2.71/601/60 120120F2.71/60 120Focus areaFocus areaSelectable areaF2.7F2.71/601/60 120120F2.71/60 120Focus area
