100The Setup MenuGeneral Camera Setup* This setting can be changed when the projector is in operation (A 88).Auto off* Set time before the monitor turns off for saving power.The default setting is 1 min. E 70Format memory/Format cardAllows you to format the internal memory (only when amemory card is not inserted) or the memory card (when amemory card is inserted).• All data stored in the internal memory or on thememory card is deleted during formatting andcannot be restored. Be sure to transfer importantpictures to a computer and save them beforeformatting.E 71Language Choose the language used for camera monitor display. E 72InterfaceWhen transferring pictures to the computer or printer fromthe camera, set the USB option to MTP/PTP (defaultsetting) or Projector. Adjust video mode settings forconnection to a television or an other device. Select fromNTSC (default setting) and PAL.E 73Charge bycomputerWhen set to Auto (default setting), you can charge thecamera’s battery by connecting the camera to a computer(provided that the computer is able to supply power).• When charging by computer, it takes more time tocharge the battery than when using the Charging ACAdapter EH-69P. Additionally, when charging bycomputer and transferring pictures to the computer, ittakes more time to charge the battery.E 73Blink warningImmediately after taking a picture using face detection(A 65) (except when using smart portrait mode), if thecamera detects a subject with closed eyes, the cameradisplays the message Did someone blink?, allowing youto check the picture. The default setting is Off.E 75Reset allAllows you to reset the camera’s settings to their defaultvalues.Certain settings such as Time zone and date andLanguage are not reset.E 77Firmware version View the current camera firmware version. E 79Option Description A
