F9Technical Notes and IndexDate and time of recordingare not correct.• If camera clock has not been set, “Date not set”indicator flashes during shooting and movierecording. Images and movies saved before clock isset are dated “00/00/0000 00:00” or “01/01/201300:00” respectively. Set the correct time and datefrom the Time zone and date option in the setupmenu.• The camera clock is not as accurate as ordinarywatches or clocks. Periodically compare the time ofthe camera clock with that of a more accuratetimepiece and reset as required.20, 104,E83No indicators displayed inmonitor.Hide info is selected for Photo info in Monitorsettings in the setup menu. 104, E86Print date not available. Time zone and date has not been set in the setupmenu.20, 104,E83Date not imprinted onimages even when Printdate is enabled.• The current shooting mode is one that does notsupport Print date.• The date cannot be imprinted on movies.104, E89Screen for setting time zoneand date is displayed whencamera is turned on. Clock battery is exhausted; all settings were restoredto their default values. 20, 22Camera settings reset.Monitor turns off, and thepower-on lamp flashesquickly.Battery temperature is high. Turn off camera andallow battery to cool down before resuming use. Afterthe lamp flashes for three minutes, the camera willturn off automatically. Pressing the power switch alsoturns off the camera.25Camera becomes hot.The camera may become hot when used for anextended period of time to shoot movies or sendimages using an Eye-Fi card, or when used in a hotenvironment; this is not a malfunction.–Problem Cause/Solution A
