93The Shooting MenuC Auto BracketingIn some situations, you may find it difficult to selectappropriate Exposure compensation and White bal-ance settings, and yet not have time to check the re-sults and adjust settings after each shot. Autobracketing can be used to vary these settings auto-matically over a series of pictures, “bracketing” a selected exposure compensa-tion or white balance setting.When Auto Bracketing is set• The Flash mode is set to B.Restrictions on Auto Bracketing and WB Bracketing• Cannot be used with Continuous settings other than r Single (c89), or BSS (c92). Thelatest setting is used and the earlier setting is canceled.• Noise reduction (c101) has no effect even if this option is set to On.• While White balance (c52) is set to White bal. preset, x WB bracketing cannot beused for shooting.• If the space in the memory or on the memory card is capable of storing only a few images,only that number of images will be stored.Exposure CompensationWhen Exposure compensation (c33) and C Auto bracketing are set simultaneously, ex-posure will be compensated at the sum of both compensation values.Rotate the mode dial to P or A and press the m but-ton to select Auto bracketing, and then press d.Option DescriptionDOff(default setting)Restores normal exposure and white balance.CAuto bracketingEach time the shutter-release button is fully pressed, the cameratakes three shots, one shot with the current exposure, and twoshots varying the exposure by values of +0.5 and -0.5 compen-sation.xWB bracketingThe camera records three shots each time shutter-release but-ton is fully pressed, bracketing current white balance setting toproduce one picture with normal white balance, one picturewith bluish cast, and one picture with reddish cast. Recordingtime roughly triples.OffAuto bracketingAUTO BRACKETINGAUTO BRACKETINGWB bracketingConfirmExit
