62More on PlaybackConnecting the USB CableTurn the computer on and wait for it to start up. After confirming that the camerais off, connect the UC-E6 USB cable (provided with your camera) as shown below.Check to be sure the connector is in the correct orientation and insert theplug straight. Do not insert or disconnect it forcibly. Connect the camera di-rectly to the computer; do not connect the cable via a USB hub or keyboard.You can now turn the camera on.Windows 2000 Professional, Windows Millennium Edition (Me),Windows 98 Second Edition (SE)When using one of the above operating systems, select Mass storage for the USB optionin the Set-up menu. If you have connected the camera to a computer running one of theabove operating systems with PTP (default setting) selected in USB, disconnect the cameraas described below. Be sure to select Mass storage before reconnecting the camera.Windows 2000 ProfessionalA dialog will be displayed welcoming you to the Found New Hardware Wizard. Click Cancelto close the dialog, and then disconnect the camera.Windows Millennium Edition (Me)After displaying a message stating that the hardware information database is being updated,the computer will start the Add New Hardware Wizard. Click Cancel to exit the wizard, andthen disconnect the camera.Windows 98 Second Edition (SE)The Add New Hardware Wizard will be displayed. Click Cancel to exit the wizard, and thendisconnect the camera.
