91Recording and Playing Back MoviesB Notes About Using Zoom During Movie Recording• The zoom indicator is not displayed during movie recording.• There may be some degradation in image quality when digital zoom is used. If youzoom in on the subject while recording a movie, the zoom motion temporarilystops at the position where optical zoom is changed to digital zoom.B Camera Temperature• The camera may become warm when recording movies for an extended period oftime or when the camera is used in a hot area.• If the inside of the camera becomes extremely hot when recording movies, thecamera will automatically stop recording. The amount of time remaining until thecamera stops recording (B10s) is displayed. After the camera stops recording, itturns itself off.Leave the camera off until the inside of the camera has cooled.Focusing and Exposure Locking During Movie Recording• The focus can be adjusted during movie recording in the following mannerin accordance with the Autofocus mode (A93) setting of the moviemenu.- A Single AF (default setting): The focus is locked when movierecording starts. To perform the autofocus function during movierecording, press the multi selector J.- B Full-time AF: The focus is adjusted repeatedly even during movierecording.• When the multi selector K is pressed during movie recording, the exposureis locked. To unlock, press K again.• When the focus mode (A65) is E (manual focus), adjust the focusmanually. The focus can be adjusted while recording movies by rotating themulti selector counterclockwise to focus on far subjects or clockwise tofocus on near subjects.• Autofocus may not perform as expected (A82). Should this occur, try E(manual focus) (A66, 67) or set Autofocus mode in the movie menu toA Single AF (default setting) and then use focus lock (A83) to record.
