72Playback FeaturesConnecting the Camera to a Television, Computer, or PrinterYou can enhance your enjoyment of images and movies by connecting thecamera to a TV, computer, or printer.• Before connecting the camera to an external device, make sure the remainingbattery level is sufficient and the camera is turned off. For information about theconnection methods and subsequent operations, refer to the documentationincluded with the device in addition to this document.Viewing images on a TV E17Images and movies captured with the camera can be viewed on a TV.Connection method: Connect the video and audio plugs of the includedAudio Video Cable EG-CP14 to the TV’s input jacks.Viewing and organizing images on a computer A73If you transfer images to a computer, you can perform simpleretouching and manage image data in addition to playing back imagesand movies.Connection method: Connect the camera to the computer’s USB portwith the included USB Cable UC-E6.• Before connecting to a computer, install ViewNX 2 on the computerusing the included ViewNX 2 Installer CD-ROM. For information aboutusing the ViewNX 2 Installer CD-ROM and transferring images to acomputer, see page 75.• If any USB devices that draw the power from the computer areconnected, disconnect them from the computer before you connectthe camera to it. Connecting the camera and other USB-powereddevices to the same computer simultaneously may cause a cameramalfunction or excessive power supply from the computer, whichcould damage the camera or memory card.Printing images without using a computer E18If you connect the camera to a PictBridge-compatible printer, you canprint images without using a computer.Connection method: Connect the camera directly to the printer’s USBport with the included USB Cable UC-E6.How to open the connector coverUSB/audio/video output connectorInsert the plug straight.