93Shooting Options: The Shooting MenuShooting, Playback and Setup MenusQ Distortion ControlSpecify whether or not the distortion is corrected. Enabling distortion controlreduces the size of the frame.Restrictions on Camera SettingsRestrictions apply to the following settings in A (auto) and high-sensitivityshooting modes.Q OnDistortion at frame peripheries is corrected.k Off (default setting)No distortion correction performed.Flash modeFlash mode is disabled (W) when [Continuous], [BSS], or [Multi-shot 16] is selectedfor [Continuous].Applied setting is restored when [Single] or [Intvl timer shooting] is selected for[Continuous].Self-timerIf self-timer is on, only one picture will be shot when shutter is released, regardlessof settings chosen for [Continuous].Applied [Continuous] settings are restored when picture is shot or self-timer isturned off.ISO sensitivityWhen [ISO sensitivity] is set to [3200], [Image mode] cannot be set to H (4,000 ×3,000), I (4,000 × 3,000), R (3,264 × 2,448), and P (3,968 × 2,232).At these image mode settings, selecting [3200] for [ISO sensitivity] automaticallyswitches the [Image mode] setting to L (2,592 × 1,944). When any option otherthan [3200] is next selected for [ISO sensitivity], the original image mode setting isrestored.At an [ISO sensitivity] setting of [3200], the [Multi-shot 16] option of the continuousshooting mode is not available. At a [Continuous] setting of [Multi-shot 16],selecting [3200] for [ISO sensitivity] switches the [Continuous] setting to [Single].The [Continuous] setting does not change even when [ISO sensitivity] is set tooptions other than [3200].
