98Compatible SpeedlightsThe D1 can be used with the Speedlights listed below.1 Can only be used when the SB-28DX is attached. When other Speedlights areattached and set to TTL, the shutter-release button will lock and no photographs canbe taken.2 When spot metering is used, this setting is treated as “standard TTL flash control”(see above).3 The balanced fill-flash mode used depends on the lens. When a D-Type Nikkor lens(IX-Nikkor excepted) is attached, 3D multi-sensor balanced fill-flash is used. Whena CPU lens (F3AF excepted) of a type other than type D is attached, multi-sensorbalanced fill-flash is used. If a non-CPU lens is attached, center-weighted fill-flashis used.4 The SB-28DX offers two auto modes: non-TTL Auto Flash (A) and Auto Aperture(AA). AA is used when a lens with a CPU (IX-Nikkor and F3AF excepted) isattached, A when another type of lens is attached.Flash Photography: Compatible Speedlights✔ ✔✔4 ✔ ✔✔✔3 ✔SB-28DX(cordless)SpeedlightTTL 1 A M REARFlash modeFP high-speedsyncRear-curtainsyncNon-TTLauto Manual RepeatingflashStandardTTL 2Balancedfill-flashRed-eyereduction✔ ✔✔ ✔ ✔—— ✔SB-28(cordless)— ✔✔5 ✔ ——— ✔SB-27(cordless)✔ ✔✔ ✔ ✔—— ✔SB-26 6(cordless)✔ ✔✔ ✔ ✔—— —SB-25(cordless)— ✔✔ ✔ ✔—— —SB-24(cordless)— ✔— ✔ ✔—— —SB-23,SB-21B 7 ,SB-29(cordless)— ✔✔ ✔ ——— —SB-22S,SB-22,SB-20,SB-16B,SB-15(cordless)— ✔✔ ✔ ——— —SB-11 8 ,SB-14