k116kRelease ModeTo choose a release mode, press the releasemode dial lock release and turn the releasemode dial so that the pointer aligns with thedesired setting.Choosing a Release ModeMode DescriptionS Single frame: The camera takes one photograph each time theshutter-release button is pressed.C LContinuous low speed: The frame rate can be selected from valuesbetween 1 and 10 fps by pressing the S button and rotating thesub-command dial. The camera records photographs at theselected rate while the shutter-release button is pressed (0 117).C HContinuous high speed: The frame rate can be selected by pressing theS button and rotating the sub-command dial. Choose from 10, 11,12, and 14 fps. The camera records photographs at the selectedrate while the shutter-release button is pressed (0 117).QQuiet shutter-release: As for single frame, except that the mirror doesnot click back into place while the shutter-release button is fullypressed, allowing the user to control the timing of the click madeby the mirror, which is also quieter than in single frame mode. Inaddition, a beep does not sound regardless of the setting selectedfor Beep in the setup menu (0 310). Continuous release can alsobe selected by pressing S and rotating a command dial until bs isdisplayed in the rear control panel, in which case the camera willtake pictures at about 3 fps while the shutter-release button ispressed.Pointer
