97tSharing Custom Picture ControlsCustom Picture Controls created using the Picture Control Utility available withViewNX 2 or optional software such as Capture NX 2 can be copied to a memory cardand loaded into the camera, or custom Picture Controls created with the camera canbe copied to the memory card to be used in compatible cameras and software andthen deleted when no longer needed.To copy custom Picture Controls to or from thememory card, or to delete custom Picture Controlsfrom the memory card, highlight Load/Save in theManage Picture Control menu and press 2. Thefollowing options will be displayed:• Copy to camera: Copy custom Picture Controls from thememory card to custom Picture Controls C-1through C-9 on the camera and name them asdesired.• Delete from card: Delete selected custom PictureControls from the memory card. The confirmationdialog shown at right will be displayed before aPicture Control is deleted; to delete the selectedPicture Control, highlight Yes and press J.• Copy to card: Copy a custom Picture Control (C-1through C-9) from the camera to a selecteddestination (1 through 99) on the memory card.A Saving Custom Picture ControlsUp to 99 custom Picture Controls can be stored on the memory card at any one time. Thememory card can only be used to store user-created custom Picture Controls. The presetPicture Controls supplied with the camera can not be copied to the memory card, renamed,or deleted.
