175gThis option is displayed only when an Eye-Fi memory card (available separately fromthird-party suppliers) is inserted in the camera. Choose Enable to uploadphotographs to a preselected destination. Note that pictures will not be uploaded ifsignal strength is insufficient.Observe all local laws concerning wireless devices and choose Disable wherewireless devices are prohibited.When an Eye-Fi card is inserted, its status is indicated by an iconin the information display:• d: Eye-Fi upload disabled.• e: Eye-Fi upload enabled but no pictures available for upload.• f (static): Eye-Fi upload enabled; waiting to begin upload.• f (animated): Eye-Fi upload enabled; uploading data.• g: Error.View the current camera firmware version.Eye-Fi Upload G button ➜ B setup menuD Eye-Fi CardsEye-Fi cards may emit wireless signals when Disable is selected. If a warning is displayed inthe monitor (0 224), turn the camera off and remove the card.See the manual provided with the Eye-Fi card, and direct any inquiries to the manufacturer.The camera can be used to turn Eye-Fi cards on and off, but may not support other Eye-Fifunctions.A Supported Eye-Fi CardsAs of January 2011, the following cards can be used: 2 GB SD Eye-Fi cards in the Shareproduct category, 4 GB SDHC Eye-Fi cards in the Share Video product category, and 8 GBSDHC card in the Pro X2 product category. Some cards may not be available in somecountries or regions; consult the manufacturer for more information. Eye-Fi cards are for useonly in the country of purchase. Be sure the Eye-Fi card firmware has been updated to thelatest version.Firmware Version G button ➜ B setup menu
