17XAttach a LensCare should be taken to prevent dust from entering the camera when the lens isremoved. The lens generally used in this manual for illustrative purposes is an AF-SDX NIKKOR 18–55mm f/3.5–5.6G VR.1 Turn the camera off.2 Remove the rear lens cap and thecamera body cap.3 Attach the lens.Keeping the mounting mark on the lensaligned with the mounting mark on thecamera body, position the lens in thecamera’s bayonet mount (q). Beingcareful not to press the lens-releasebutton, rotate the lens counter-clockwise until it clicks into place (w).Slide the A-M mode switch to A(autofocus; if the lens has an M/A-Mswitch, select M/A for autofocus withmanual override).D AutofocusAutofocus is supported with only AF-S and AF-I lenses, which are equipped with autofocusmotors. Autofocus is not available with other AF lenses (0 197).Focal length scaleFocal length markA-M mode switch (see below)VR (vibration reduction) switch (0 18)Mounting markRear lens capLens capFocus ring (0 45, 106)CPU contacts (0 198)Zoom ring (0 29)
