Nikon F6 Instruction Manual

Contents

Nikon F6 Instruction Manual Manual pdf 46 page image

46Film—continued•Film rewinding with button operationTo rewind film at mid-roll or when the Custom Setting Menu “d2:Film rewind” (x 101) is set to “Manual”, rewind the film accordingto the following instructions.When rewinding film, make sure the film rewind knob is down.• Film cannot be rewound with the film rewind knob in up position.If film does not start to rewind or filmrewind stops at mid-roll• When battery power is very low, or at lowtemperatures, film may not start rewinding or filmrewind may stop at mid-roll, and o–– and the framenumber will blink in the top LCD panel and viewfinder.In this case, turn the power switch off, change batteries, then turn the power switchon and rewind film again. Or, rewind film manually using film rewind crank (x 47).• When the power switch is turned off during film rewind, film rewind stops. In thiscase, turn the power switch on and rewind film again. Or, activate film rewindmanually using the film rewind crank (x 47).CSM d3: Film can be set to not rewind all the way and leave the film leaderout (x 101).Open the R1 button cover and press the filmrewind R1 „ button then press the R2 „button.• o–– blinks in the top LCD panel and viewfinderduring film rewind and the frame counter countsbackwards until rewind is complete. Also,“Rewinding...” is displayed in the rear LCD panelduring film rewind.• Film is completely rewound when the frame countershows a blinking E in the top LCD panel andviewfinder, and “REWIND COMPLETED” is displayedin the rear LCD panel. (E appears without blinkingin the top LCD panel, and viewfinder indication and“REWIND COMPLETED” disappear from the rearLCD panel when the exposure meter is off.) Openthe camera back and remove the film cartridge.