12 13EnEnUsing Tripodn How to Use the Camera Platform1) Rotate the panhandle 1 counterclockwise to movethe camera platform up, down, left, and right.CAUTIONSBe careful not to rotate the panhandle 1 too farcounterclockwise, as it will disconnect.2) Rotate the scope base stopper 2 counterclockwiseto change the angle of the scope.3) After setting the position, rotate the panhandle 1and scope base stopper 2 clockwise to lock them.n How to Use the Elevator1) Rotate the elevator stopper 3 counterclockwise, andmove the elevator stopper while holding the base ofthe camera platform 4. Rotate the stopper clock-wise to lock the stopper at the desired height.1243Fig. 3n How to Extend or Open the Legs1) You can extend or contract the legs freely by settingup the flip lock lever 1 and lock the legs by settingdown the lever. The legs fold out in three stages.Stretch the legs in order from the top stage. 1Fig. 42) When opening the legs, hold leg A and slowly openleg B. The three legs are opened at the same time.When closing the legs, lift up the stay 2 a little fromthe bottom so that the legs can be closed smoothly.AB2Fig. 5