Nikon R1 Instruction Manual

Contents

107 Flash operation using various accessories4 Flash shooting with Speedlight Stand AS-20Use the provided Speedlight Stand AS-20 to freely position theSB-R200. The Attachment Ring SX-1 can be attached to a tripod.Example H H-1Dual-light flash operationWhen shooting clear glasses (H-4) with asingle built-in flash unit, distinct shadowsappear behind the subject, meaning thetexture of the glass cannot be reproducedsuccessfully. In this setup (H-1), theSB-R200 is placed on the right behind thesubject using the AS-20 to bounce light offthe rear wall. In addition, another SB-R200is used from the top. The result is asuccessful rendering of the textures andcontours of the glasses.Flash setup• Camera: D70• Lens: AF-S DX Zoom-Nikkor18-70mm f/3.5-4.5G IF-ED• Group A: SB-R200 (TTL)• Group B: SB-R200 (TTL)H-4 example in “Close-up Speedlight PhotographyExamples” was taken using a single built-in flash.Attachment of the SB-R200 to the AS-201 Slide the SB-R200’s mounting foot into the AS-20’sSpeedlight mounting shoe and slide the Lockswitch.• Slide the Lock switch until it stops and make sure thered part can no longer be seen.• To remove, slide the Lock switch and remove.2 Adjust the SB-R200’s flash head.• The flash head of the SB-R200 tilts down to 60° andup to 45°. The flash head can be set at click stopsevery 15°.SU-800 Group ASB-R200Group BSB-R200AS-20AS-20LOCKLOCK