Nilfisk-Advance Captor 5400 Quick Start Troubleshooting Manual

Also see for Captor 4300: Mechanical repair service manual Instructions for use Quick start manual

Nilfisk-Advance Captor 5400 Quick Start Troubleshooting Manual Manual pdf 3 page image

FORM NO. 56043093 / Captor™ 4300, 4800, 5400 - 1INTRODUCTIONThis manual will help you get the most from your Advance rider Scrubber-Sweeper. Read it thoroughly before servicing the machine.Note: Bold numbers and letters in parentheses and underlined indicate an item illustrated on pages 9-10 i.e. (B).This product is intended for commercial use only.PARTS AND SERVICERepairs, when required, should be performed by your Authorized Advance Service Center, who employs factory trained service personnel, andmaintains an inventory of Advance original replacement parts and accessories.Call the ADVANCE DEALER named below for repair parts or service. Please specify the Model and Serial Number when discussing yourmachine.(Dealer, affix service sticker here.)NAME PLATEThe Model Number and Serial Number of your machine are shown on the Nameplate on the machine. This information is needed when orderingrepair parts for the machine. Use the space below to note the Model Number and Serial Number of your machine for future reference.MODEL NUMBERSERIAL NUMBERHOPPER SAFETY SUPPORTWARNING!Make sure the Hopper Safety Support (KK)is in place whenever attempting to do anymaintenance work under or near the raisedhopper. The Hopper Safety Support (KK) holdsthe hopper in the raised position to allow workto be performed under the hopper. NEVER relyon the machine’s hydraulic components to safelysupport the hopper.JACKING THE MACHINECAUTION!Never work under a machine without safety stands or blocks to support the machine.• When jacking the machine, do so at designated locations (Do Not jack on the hopper) – see jacking locations (44).GENERAL INFORMATION