Nilfisk-Advance Nilisk-Alto 866 Service Manual

Service Manual: Clarke Focus II Midsize, Nilisk-Alto ScrubTecForm Number 56043117 Page 7• In case of machine malfuncions ensure that these are not caused by a lack of maintenance. Otherwise, requestassistance from the authorized personnel or from an authorized Service Center.• Use brushes and pads supplied with the machine and those speciied in the Operator’s Manual. Using otherbrushes or pads could reduce safety.• In case of machine malfuncions ensure that these are not caused by a lack of maintenance. Otherwise, requestassistance from the authorized personnel or from an authorized Service Center.• If the machine does not work properly, is damaged, has water or foam leaks, has been let outdoors exposedto bad weather condiions, is wet or has been dropped into water, turn it of immediately and contact anauthorized service center or a qualiied technician.• If parts must be replaced, require ORIGINAL spare parts from an Authorized Dealer or Retailer.• To ensure machine proper and safe operaion, the scheduled maintenance shown in the relevant chapter of thisManual, must be performed by the authorized personnel or by an authorized service center.• Carefully read all the instrucions before performing any maintenance/repair procedure.• Do not wash the machine with direct or pressurized water jets, or with corrosive substances.• The machine must be disposed of properly, because of the presence of toxic-harmful materials (bateries, etc.).GENERAL MACHINE DESCRIPTIONThe Clarke Focus II Midsize scrubber is a batery powered walk behind loor scrubber designed to clean lat hard surfaces.It is a 24 volt system. It has one controller that operates the scrub and vacuum funcions and another that operates thedrive system. It can have a “disc” type of scrub deck, “cylindrical” or “boost”™.NAMEPLATEThe nameplate contains important ideniicaion informaion which will be needed when ordering parts: Modeldescripion, Code, and Serial Number.