Nilfisk-Advance RS 501 Instructions For Use Manual

Also see for RS 501: User manual Service manual User manual

Contents

Nilfisk-Advance RS 501 Instructions For Use Manual Manual pdf 38 page image

ENGLISH INSTRUCTIONS FOR USE22 33015498(3)2008-02 RS 501MACHINE STORAGEIf the machine is not going to be used for more than 30 days, proceed as follows:Empty the dust control system water tanks according to the following procedure.Prepare the machine, as shown in the After Machine Use paragraph.Store the machine indoor, in a clean and dry place, protected from bad weather conditions and with the following values:Temperature: +33.8°F to +122°F (+1°C to +50°C)Humidity: maximum 95%Disconnect the negative connector from the battery (18, Fig. E).Handle the diesel engine as shown in the relevant Manual.WARNING!When the machine is to be transported or stored at ambient temperatures below +32°F (0°C), check that watertanks are empty, disassemble and drain the water ilter housing. Run water dust control and pressure washerpumps.FIRST PERIOD OF USEAfter the irst period of use (irst 8 hours) it is necessary to perform the following procedures:Check the fastening and connecting elements for proper tightening. Check the visible parts for integrity and leaks.After the irst 50 working hours, perform checks and replacements shown in the Scheduled Maintenance Table.MAINTENANCEThe lifespan of the machine and its maximum operating safety are ensured by correct and regular maintenance.The following table provides the scheduled maintenance. The intervals shown may vary according to particular working conditions,which are to be deined by the person in charge of the maintenance.WARNING!Maintenance procedures must be performed when the machine is off (ignition key removed).Moreover, read carefully the instructions in Safety chapter before performing any maintenance procedure.All scheduled or extraordinary maintenance procedures must be performed by qualiied personnel, or by an authorized ServiceCenter.This Manual contains the Scheduled Maintenance Table and describes only the easiest and most common maintenanceprocedures.For other maintenance procedures contained in the Scheduled Maintenance Table or for extraordinary maintenance procedures seethe Service Manual that can be consulted at any Service Center.SCHEDULED MAINTENANCE TABLEMaintenanceRunning-inperiod (after theirst 50 hours)Every 10hours orbefore useEvery200hoursEvery600hoursEvery1,200hoursEvery2,400hoursLongperiodsEngine oil level checkEngine air ilter cleaningEngine radiator in cleaning checkEngine coolant level checkBattery luid level checkHydraulic system oil level and drain ilter eficiency checkHydraulic system oil cooler in check and cleaningHopper, ilter and suction hose cleaning, and gasketcheckWater nozzle and ilter cleaningBrake luid level checkReverse gear buzzer operation check1.2.3.••4.5.https://harrissupplyind.com - To Order Parts Call 608-268-8080