Nilfisk-Advance Sweeper SR 1700D 2W D User Manual

Contents

Nilfisk-Advance Sweeper SR 1700D 2W D User Manual Manual pdf 45 page image

USER MANUAL33014815(1)2005-07 A 7StabilityMachine stability depends on the conditions in which it isused.If the machine is used within the conditions of use specified inthe manual, it is stable.To this end, the following tests were carried out under thesame conditions on a prototype identical to the series modeland no stability problems arose. The conditions were:Flat ground with good surface conditions:– Transfer maximum speed: 14 km/h– Working speed: from 1 to 8 km/h– Bending radius (maximum speed of 14 km/h): 3 m– Bending radius (speed of 5 km/h): 0 m.On sloping ground with good surface conditions andmaximum longitudinal slope of 20%:– Bending radius (maximum speed of 5 km/h): 3 m– Bending radius (speed of 1 km/h): 0 m.Maximum crossfall while in transfer: 15%.Maximum crossfall, at 5 km/h: 20%.The tests were carried out with lowered and empty hopper.For different conditions of use, the machine operator shouldbe able to assess the limits of the machine,and should, in any case, follow the indications laid down in themanual.Information on broomsSide brooms (2, Fig. E)– Polypropylene side broom– Polypropylene and steel side broom– Steel side broom– Nylon side broomMain brooms (13, Fig. E)– Natural fibre and polypropylene main broom– Polypropylene main broom– Polypropylene and steel main broom– Nylon main broomBrooms with a moplen shaft or with different bristles can besupplied on request.SAFETY SYSTEMSThe machine is provided with:– An operator's seat sensor that stops the machine assoon as the operator leaves the seat;– A safety lever on the joystick to avoid accidental wrongoperation.MAIN TECHNICAL DATAGeneral data ValuesSweeping system Mechanical suctionLoading system FrontSweeping range with one side broom 1,300 mmSweeping range with two side brooms 1,700 mmCollection width 1,000 mmStandard hour working capability 21,000 m2/hMain broom length 994 mmMain broom diameter 380 mmEngine Lombardini LDW1003Broom motor HydraulicDrive motor HydraulicSuction motor Electric 12 VDrive type HydrostaticGradeability 20%Maximum drive speed 15 Km/hDust filters Polyester multi-pocketFiltering surface 8.5 m²Hopper FrontCapacity 360 litresDumping type MultilevelDumping height 1,510 mmLifting type HydraulicOverall dimensions ValuesLength 2,500 mmWidth 1,350 mmHeight 1,570 mmWeight in running conditions 1,280 KgDiesel engine ValuesMake LombardiniType LDW1003Cylinders 3Displacement 1,028 cm³Bore 75 mmStroke 77.6 mmCompression ratio 22.8 : 1Maximum speed 3,600 rpmMaximum speed (in running condition) 2,450 rpmMaximum power 15 kWBattery 12 V 80 Ah