Nilfisk-Advance Terra 5200B Instructions For Use Manual

Contents

Nilfisk-Advance Terra 5200B Instructions For Use Manual Manual pdf 12 page image

INSTRUCTIONS FOR USE10 Terra™ 5200B – 146 1996 000(2)2004-08MAINTENANCEThe lifespan of the machine and maximum operating safety are ensured by correct and regular maintenance.The following table summarizes the routine maintenance required. The intervals indicated can be changed to suit workingconditions. These must be defined by the person in charge of the maintenance.All scheduled or extraordinary maintenance operations must be performed by skilled personnel, or by an AuthorizedService Center.This manual describes only the easiest and most common maintenance procedures.SCHEDULED MAINTENANCE TABLE(*): for the related procedure, refer to the Service Manual.(1): or before each start.(2): and after the first 8 running-in hours(3): replace hydraulic oil for the first time after 500 hours, then after 2,000 hours or every yearWARNING!These operations must be carried out with the machine off, the ignition key not inserted and (ifrequired) the battery disconnected.Moreover, carefully read the instructions in the Safety chapter.NOTEFor other maintenance procedures contained in the Scheduled Maintenance Table, refer to thespecific Service Manual that can be consulted at any Service Center.Maintenance operation On delivery Every 10hoursEvery 50hoursEvery 100hoursEvery 200hoursEvery 400hoursBattery fluid level check (1)Hopper lifting system hydraulic oil levelcheck (1)Motor-to-main broom belt visualinspection and tension check (*)Skirt height and operation checkSide and main broom height checkFrame dust filter cleaning and integritycheckPocket dust filter cleaning and integritycheckFilter shaker operation check (*)Brake adjustment (*)Nut and screw tightening check (*) (2)Drive wheel chain tension check andcleaning (*)Steering chain cleaning (*)Vacuum hose integrity check (*)Pulley-to-main broom belt replacement (*)Motor-to-main broom pulley V-beltreplacement (*)Hopper gasket integrity check (*)Hopper lifted position control microswitchadjustment check (*)Hopper horizontal position controlmicroswitch adjustment check (*)Motor carbon brush check andreplacement (*)Hydraulic oil replacement (*) (3)