Nine Eagles GALAXY VISITOR 3 Operating Instructions Manual

Contents

Nine Eagles GALAXY VISITOR 3 Operating Instructions Manual Manual pdf 10 page image

"Primary" and "expanded" control function settingThe transmitter offers the facility to adjust the sensitivity of thestick movements. Initially we recommend "softer" reduced travelsfor beginners.Open the transmitter battery compartment and insert the four AAcells* (check for correct polarity).Procedure:Switch the transmitter on, and pressthe right-hand stick inward.Reduced control functionThe "Dual-Rate status indicator" discon the screen is reduced to half.Manoeuvrability 50%Expanded control function:Press the right-hand stick inwardagain.The full black disc now appears on thescreen.Manoeuvrability 100%* Please read the information regarding dry cells on page 5.Charging the flight batteryConnect the battery charger tothe mains PSU, and plug thePSU into a mains socket. Thered monitor LED on the chargerlights up.Connect the battery to the char-ger, and use "+" or "-" to set thecharge current (high = fast, low = longer battery life). Press theStart button. The monitor LED flashes. When the charge processis finished, all the LEDs on the charger flash, and you will hearan audible beep. Disconnect the battery from the charger, thendisconnect the mains PSU from the wall socket.Safety NotesThe battery must not be left unsupervised during thecharge process or be placed on an inflammable surface.Protect from damp. Do not subject it to direct sunshine,and do not cover the charger.Do not charge batteries that are hot to the touch. Allowbatteries to cool down to ambient temperature. Chargethe battery only using the charger included in the set; donot use any other charger. The charger should only beused to charge the battery included in the set. Not suitablefor charging the transmitter battery!It is essential to read right through the safety notesrelating to LiPo batteries on page 11.10Operating Instructions - GALAXY VISITOR 3 RTF FTR 2.4 GHz No. NE2529M2No. NE2529M1