Ninja BL642NZ Owner's Manual

Also see for BL642NZ: Owner's guide

Contents

Ninja BL642NZ Owner's Manual Manual pdf 11 page image

10CUST O M E R C A R E - A U : 1800 890 840Assembly and Use for the Ninja® Processor BowlASSEMBLYFROZEN DRINKSSMOOTHIESPUREEPULSEHIGHMEDLOW /DOUGHAUTOAUTOAUTOFig. 5a Fig. 5bFROZEN DRINKSSMOOTHIESPUREEPULSEHIGHMEDLOW /DOUGHAUTOAUTOAUTOFig. 2FROZEN DRINKSSMOOTHIESPUREEPULSEHIGHMEDLOW /DOUGHAUTOAUTOAUTOFig. 3Fig. 1 Fig. 4Fig. 6aFig. 6bWARNING: Never leave the appliance unattended while in use.CAUTION: Blade assemblies are sharp, not locked in place and removable, handle with care. Whenhandling the blade assemblies, always hold them by the shaft.IMPORTANT: Make sure that the motor base is plugged in for use.NOTE: Nutri Ninja™ | Ninja ® Blender Duo with Auto-iQ™Technology can sense which jar is on the motor base.The available function lights will illuminate dependingon which jar is placed on the motor base. (Fig. 1)1 Holding the desired blade by the top of the shaft, placeit onto the drive gear inside the bowl. Ensure that theattachment is seated properly and is standing upright.(Fig. 2)NOTE: The blade will fit loosely on the drive gear.2 Place the motor base on a clean, dry, level surface suchas a counter or table top.3 Align and lower the Processor Bowl onto the motorbase. (Fig. 3) Handle should be aligned slightly to theright of the “LOCK” symbol on the motor base.4 Rotate the bowl clockwise until it locks in place, you willhear a click when the lock is engaged. (Fig. 4)5 The bowl can be placed on the motor base two ways;the handle can be on the front right corner or the frontleft corner. (Fig. 5a, Fig. 5b)6 Add the ingredients to the bowl, making sure that theydo not exceed the “MAX” fill line on the side of thebowl.7 Holding the lid by the handle in the upright position,place it on top of the Processor Bowl aligning thetriangle ( ) located on the lid with the triangle ( )located on the Processor Bowl handle. (Fig. 6a) Pressthe handle down until you hear a click.The triangles on the lid and the Processor Bowl handleMUST be aligned in order for the blender to turn on.(Fig. 6b)NOTE: The 1.8 L bowl is not intended for blendingdrinks. Do not overfill.8 Plug the power cord into the electrical outlet and pressthe power button ( ).IMPORTANT: As a safety feature, the powerbutton ( ) will flash and the motor will not workif the bowl and lid are not installed correctly.When the bowl and lid are installed properly, thepower button ( ) will be solid, indicating that theappliance is ready for use.