Ninja BL642NZ Owner's Manual

Also see for BL642NZ: Owner's guide

Contents

Ninja BL642NZ Owner's Manual Manual pdf 15 page image

14CUST O M E R C A R E - A U : 1800 890 840Assembly and Use for the Nutri Ninja™ CupsASSEMBLY USE REMOVALFig. 2 Fig. 3 Fig. 4 Fig. 5 Fig. 6AUTOFig. 1WARNING: Never leave the appliance unattended while in use.CAUTION: Blade assemblies are sharp, not locked in place and removable, handle with care. Whenhandling the blade assemblies, always hold them by the shaft.IMPORTANT: Make sure that the motor base is plugged in for use.NOTE: Nutri Ninja™ | Ninja ® Blender Duo with Auto-iQ™Technology can sense which jar is on the motor base.The available function lights will illuminate dependingon which jar is placed on the motor base. (Fig. 1)1 Place the motor base on a clean, dry, level surface such as acounter or table top. Press down on the motor base to makesure that the suction cups adhere to the counter or table top.2 Add ingredients to the Nutri Ninja™ cup.3 Place the Pro Extractor Blades™ onto the cup and tightlyscrew it on clockwise until you have a good seal. (Fig. 2)4 Turn the Nutri Ninja™ cup upside down and place itonto the motor base, aligning the tabs on the cup withthe motor base. Rotate the Nutri Ninja™ cup clockwiseuntil it locks in place, you will hear a click when thelock is engaged. (Fig. 3)5 Press the power button on, and select the speedor Auto-iQ™ program that suits your needs.(Fig. 4) The Auto-iQ™ program will stop the applianceautomatically at the end of the program.6 To pause the appliance, press the selected speed orAuto-iQ™ program a second time. When the program ispaused, the light on the program button will flash untilyou press it again to resume the rest of the program.7 Once you have reached your desired consistency, stopthe appliance by pressing the power button and waitfor the blade to stop turning. Turn the Nutri Ninja™ cupanticlockwise and pull straight up to remove.(Fig. 5, Fig. 6)NOTE: Do not overfill! To avoid spilling, do not addingredients past the “MAX” fill line.8 Turn the cup upright and remove the Pro ExtractorBlades™ by twisting the Pro Extractor Blades™anticlockwise.9 Place the Sip & Seal ™ lid onto the Nutri Ninja™ cup,twist to seal and enjoy!10 Make sure that the motor base is unplugged whennot in use.11 To release the motor basefrom the counter or table top,place your hands underneathboth sides of the motor baseand gently pull the unit up andtowards you. (Fig. 7)Fig. 7