Ninja BL64X series Owner's Manual

Contents

14www.sharkninjamanuals.comFig. 2or orFig. 3 Fig. 4 Fig. 5AUTOFig. 6Fig. 1Assembly and Use for the Nutri Ninja® CupsWARNING: Never leave the appliance unattended while in use.CAUTION: Pro Extractor Blades™ are sharp and removable, handle with care. When handling the ProExtractor Blades, do not hold the blades, always hold by the base of the Pro Extractor Blades.CAUTION: Do not put hot liquids in the Stainless Steel 650 ml Ninja Cup before blending. Start with cool orroom temperature liquid. Heated liquid can create internal pressure in a sealed cup, which may erupt onopening and cause a burn injury.CAUTION: DO NOT BLEND HOT LIQUIDS. Allow the liquids and foods to cool to room temperature before blending.IMPORTANT: Make sure that the motor base is plugged in for use.IMPORTANT: When processing soft dry ingredientssuch as day-old bread or cheese use quick, short 1second pulses. Do not overfill to avoid overheating theappliance. Allow the appliance to cool after each use.NOTE: Nutri Ninja | Ninja ® Blender Duo with Auto-iQ ®Technology can sense which jar is on the motor base.The available function lights will illuminate dependingon which jar is placed on the motor base. (Fig. 1)1 Place the motor base on a clean, dry, level surface suchas a counter or table top. Press down on the motorbase to make sure that the suction cups adhere to thecounter or table top.2 Add ingredients to the Nutri Ninja cup.3 Place the Pro Extractor Blades onto the cup and tightlyscrew it on clockwise until you have a good seal. (Fig. 2)4 Turn the Nutri Ninja cup upside down and place it onto themotor base, aligning the tabs on the cup with the motor base.Rotate the Nutri Ninja cup clockwise until it locks in place,you will hear a click when the lock is engaged. (Fig. 3)5 Press the power button on, and select the speed orAuto-iQ program that suits your needs. (Fig. 4) TheAuto-iQ program will stop the appliance automaticallyat the end of the program.6 To pause the appliance, press the selected speed orAuto-iQ program a second time. When the program ispaused, the light on the program button will flash untilyou press it again to resume the rest of the program.7 Once you have reached your desired consistency, stop theappliance by pressing the power button and wait for the ProExtractor Blades to stop turning. Turn the Nutri Ninja ® cupanticlockwise and pull straight up to remove. (Fig. 5, Fig. 6)NOTE: Do not overfill! To avoid spilling, do not addingredients past the “MAX” fill line.8 Turn the cup upright and remove the Pro Extractor Bladesby twisting the Pro Extractor Blades anticlockwise.9 Place the Sip & Seal ® lid onto the Nutri Ninja ® cup,twist to seal and enjoy!NOTE: Sip & Seal lid not intended for use with the XLMulti-serve 1.4 L Ninja Jar.10 Make sure that the motor base is unplugged when not in use.11 To release the motor base from thecounter or table top, place your handsunderneath both sides of the motorbase and gently pull the unit up andtowards you. (Fig. 7)Fig. 7ASSEMBLY USE REMOVAL