18www.sharkninjamanuals.comHOW TO CLEANCAUTION: Make sure that the motor base isunplugged from the power source beforeinserting or removing any attachment and beforecleaning.CAUTION: DO NOT immerse the motor base intowater or any other liquid.CAUTION: Use caution when handling the bladeassemblies as the blades are very sharp.1 Separate/remove all parts from each other.2 Clean the motor base with a damp cloth and wipe dry.NOTE: The Stainless Steel Ninja ® Cup is NOTdishwasher safe.3 Place the lids, pitcher, bowl, Nutri Ninja ® cups, discs,feed chute, jar, grinder and blade assemblies in thedishwasher. Place the lids and attachments on thetop rack.OR4 Carefully hand wash the lids, pitcher, bowl, NutriNinja cups, discs, feed chute, jar, grinder and bladeassemblies in warm, soapy water with a soft cloth.Please call customer service if any servicing needs tobe performed on the appliance at 1-877-646-5288.Care & MaintenanceHOW TO STORE1 Store the Nutri Ninja | Ninja Blender Duo with Auto-iQ ®Technology upright with the pitcher on the motor base,Stacked Blade assembly inside the pitcher and lidlocked on the pitcher. Do not place anything on top.Store the Food Processor Bowl with the chopping bladeinside and lid on top and the Nutri Ninja cup with therest of the attachments along side the appliance or ina cabinet where they will not be damaged and won’tcause a hazard. Be sure to store the grinder with lidattached.RESETTING THE MOTOR THERMOSTATThe Nutri Ninja | Ninja Blender Duo with Auto-iQTechnology features a safety system which preventsdamage to the unit’s motor and drive system should youinadvertently overload your appliance. If the applianceis being overloaded, the motor will stop. Allowthe appliance to cool for approximately 15minutes. To reset the appliance, follow the resettingprocedure below:1 Unplug the appliance from the electrical outlet.2 Remove and empty the container and ensure that nofood is jamming the blades or attachments.3 Allow the appliance to cool for approximately 15minutes.4 Re-install the container onto the base and re-plug theappliance into the electrical outlet.5 Proceed to use the appliance as before making sure notto exceed the recommended maximum capacities.