17www.ninjakitchen.comEnglishUSING THE CHOPPING BLADE ASSEMBLY1 Holding the Chopping Blade Assembly by the shaft,place it onto the star-shaped post inside the bowl.Ensure that the attachment fits on the star-shapedpost and that it is standing straight.2 Add the ingredients and secure the bowl lid ontothe bowl. (Fig. 19)3 Plug the power cord into the electrical outlet andpress the power toggle up ( ) to turn the power“On”.4 Select the speed that best suits your needs. Pulseingredients for even chopping by pressing downon the “Start/Stop/Pulse” toggle in short intervals.Press up on the “Start/Stop/Pulse” toggle to runthe unit continuously.NOTE: When making dips or sauces, set thevariable speed on a low setting (1-3) and press the“Start/Stop/Pulse” toggle up.NOTE: Please refer to “Speed Settings & Uses”chart for suggested uses and speeds.5 When you have reached your desired consistency,stop the appliance by pressing the “Start/Stop/Pulse” toggle up and wait for the blade to stopturning.6 Press the power toggle ( ) down to turn the poweroff.7 To remove the lid, press the release button andturn the lid counter-clockwise and lift the lid off.Hold the bowl with one hand and lift the lid withthe other for best leverage. Turn the bowl counter-clockwise and then lift off the base.(Fig. 20, Fig. 21)CAUTION: Use care when handling theremovable Chopping Blade Assembly. Bladesare sharp, handle with caution. Always handleby the shaft.Fig. 19 Fig. 22USE//USING THE DOUGH BLADE1 Place the motor base on a clean, dry, level surfacesuch as a counter or table top. (Fig. 22)2 Secure the bowl onto the motor base.3 Holding the dough blade by the shaft, place it ontothe star-shaped post inside the bowl. Ensure thatthe attachment fits on the star-shaped post andthat it is standing straight.4 Add the ingredients and secure the bowl lid ontothe bowl.NOTE: For best results add dry ingredients first andthen add wet ingredients.5 Plug the power cord into the electrical outlet andpress up on the power toggle ( ) to turn the power“On”.6 IMPORTANT: Use only the “DOUGH/DISC” settingwhen mixing dough or using either disc. Press upon the Start/Stop/Pulse Toggle to start the unit.7 When finished making dough, press up on theStart/Stop/Pulse Toggle to stop the unit. Removethe bowl from the motor base. (Fig. 20, Fig. 21)8 Press the power toggle ( ) down to turn off theunit.NOTE: As a safety feature, the power lightwill flash when the power toggle ( ) is pushedupwards if the lid or bowl are not installedcorrectly. Then the lid and bowl are installedproperly and the toggle ( ) is pushed up, thepower light will become solid, indicating theunit is ready for use.Dough &ProcessingFig. 20/Fig. 21REMOVAL USE