Nitsuko 1232 Instruction And Installation Manual

Also see for 824: Handbook Quick reference guide

Contents

Nitsuko 1232 Instruction And Installation Manual Manual pdf 111 page image

Intercom Outgoing Callæ 4-35 ænnnn Intercom Link IncreaseDESCRIPTION:There are 2 intercom links provided in the TX-Z 308, 6 intercom links in the TX-Z 824 System, and 10intercom links in the TX-Z 1232/2464 System. One link is reserved if Background Music is used in TX-Z824/1232/2464 system. If a DSS console is connected to TX-Z 1232/2464, it also occupies a link.Intercom Link Increase allows unused Trunk line circuits to be used as Intercom links, providingincreased Intercom calling capabilities. The Intercom Hold/Conference feature is disabled when Intercomlinks are increased.STATION APPLICATION:SystemOPERATION:Not applicable.RELATED SYSTEM DATA:#45: Intercom Link Increasennnn Intercom CallDESCRIPTION:Intercom Call allows extension-to-extension conversation. The system can be programmed for one oftwo Intercom Signaling modes: ringing or voice announce. When voice announce is programmed, anIntercom call signals the called extension with a beep (not ringing). After the beep sounds, the caller canmake a voice announcement over the speaker of the called extension.Regardless of the signaling mode programmed, an extension user can change it on a per call basis. Forexample, a ringing Intercom call can be changed to a voice announced call by dialing a code.STATION APPLICATION:KTS, SLTOPERATION:To place an Intercom call:1. Lift handset or press SPK key. (See Note 1)2. Dial extension number.To convert a ringing call into a voice announced call, or vice versa, dial 1.1. Lift handset.2. Dial 7, wait for dial tone.3. Dial extension number.To convert a ringing call into a voice announced call, or vice versa, dial 1.1. Lift handset.2. Dial extension number.To convert a ringing call into a voice announced call, or vice versa, dial 1.Note 1: If Program #75-D is 0 (No tone), press ICM key after Step 1 to seize Intercom. (TX-Z 824/1232/2464)Note 2: Call Monitor, Speakerphone and Single Step Access provide ways to place Intercom Calls without lifting thehandset.RELATED SYSTEM DATA:#19-B: Intercom Call Type#75-D: Key Telephone Off-Hook Mode Selection

/ 388

Related manuals for Nitsuko 824

Nitsuko TX Series User Manual

This manual is suitable for:

824 Portrait 308 1232 -2464 -Grouphone TX-Z 1232 Grouphone TX-Z 2464 Grouphone TX-Z 308 Grouphone TX-Z 824 Grouphone TX-Z series

manualsdatabase

Your AI-powered manual search engine