Nitsuko 1232 Instruction And Installation Manual
Also see for 824: HandbookQuick reference guide
                                                                                                                                                                                                                                                                                                                                                                                                    | |
Contents
| 
Alphanumeric Display TEL Featuresæ 4-61 æTo activate/cancel previous message (last time you set message for DND):1. Press TRFR and *.- When DND message is activated, DND flashes intermittently.RELATED SYSTEM DATA:Not applicable.u Leave Message with MWDESCRIPTION:When an extension user makes an Intercom call to display phone and receives a busy signal or noanswer, this user leave a text message with Message Waiting (MW).STATION APPLICATION:KTS with LCDOPERATION:To leave a Message:1. Place Intercom call. Busy or no answer.2. Dial 0. MW flashes intermittently as confirmation.- Display shows "LEAVE MESSAGE ?", then you can enter a message. If you replace handset afterthis step operation, it is simple message waiting procedure.3. Dial *.4. Dial message number (00-49), dial *.orPress One-touch key No.1 or No.2 for personal message, then dial *.orPress FLASH, edit a message by Message Edit Mode, then press FLASH again and dial *.- A text message is left on called display phone.To cancel message at message-originated telephone:1. Press CHECK and #.- First message appears on the display.2. Use * to advance and use # to backward.3. Press HOLD to cancel message.orPress CLEAR to return to idle condition.To call back or delete message at message-received telephone:1. Press CHECK and *.- First message appears on the display.2. Use * to advance and use # to backward.3. Press ICM to call back.orPress HOLD to delete message.orPress CLEAR to return to idle condition.RELATED SYSTEM DATA:Not applicable.u Camp-On MessageDESCRIPTION:When an extension user makes an Intercom call to display phone and receives a busy signal, call can notbe connected. This user can send a text message. Intercom Off-hook Signaling (#04-C) must be enabledat the called extension.STATION APPLICATION:KTS with LCD |
Related manuals for Nitsuko 824
manualsdatabase
Your AI-powered manual search engine