Nivus NFP Instruction Manual

Also see for NFP: Instruction manual

Contents

Nivus NFP Instruction Manual Manual pdf 16 page image

®Instruction ManualNFPpage 16 NFP - Rev. 02 as of 24.11.20096 Storing, Delivery and Transport6.1 ReceiptPlease check your delivery according to the delivery note for completeness andintactness immediately after receipt. Any damage in transit must be instantly re-ported to the carrier. An immediate, written report must be sent to NIVUS GmbHEppingen as well.Please report any delivery incompleteness in writing to your representative or di-rectly to NIVUS Eppingen within two weeks.Mistakes cannot be rectified later!6.1.1 DeliveryThe standard delivery of the NFP transmitter contains:- the instruction manual with the certificate of conformity. Here, all necessarysteps to correctly install and to operate the measurement system are listed.- a NFP transmitter- a 2.5 mm special screw driver to use the caged spring terminals in the con-nection compartment of the transmitterAdditional accessories such as sensors, welding nozzle, tapping saddle, ballstop valve, pipe sensor retaining element etc. depending on order. Please checkby using delivery note.6.2 StoringThe following storing conditions shall be strictly adhered to:Transmitter: max. temperature: + 70 °C (158 °F)min. temperature: - 30 °C (-22 °F)max. humidity: 90 %, non-condensingThe devices must be protected from corrosive or organic solvent vapours, radio-active radiation as well as strong electromagnetic radiation.6.3 TransportThe device is conceived for harsh industrial conditions. Despite this do not ex-pose them to heavy shocks or vibrations.Transportation must be carried out in the original packaging.6.4 ReturnThe device must be returned at customer cost to NIVUS Eppingen in theoriginal packaging.Otherwise the return cannot be accepted!