Nobel FCD 05 Instruction Manual
                                 | |
Contents
| 
INSTRUCTIONS MANUAL AUTOMATIC FILTERSFCD-FACD-FFD /DT /DP /DT-DUAL /DP-DUALs.r.l.Milano - ITALY Page 8 of 23 fcd-dp_mi-r4.doc – r.44. INSTALLATION4.1. How to remove packagingThe vessels are shipped wrapped in a plastic foil; remove it with care before starting-up.Keep the cards and everything contained inside the packaging.The media filter are shipped as separated:• in bags of 25 kg (35 liters approx) each or fraction anthracite• in bags of 25 kg each or fraction quartz sand• in bags of 25 kg (50 liters approx) each or fraction activated carbon• in bags of 25 kg each or fraction PL4.2. How to move and lift the unitThe vessels can be displaced when they are empty, hooking and lifting by the special ringsmounted on the upper part of the vessels (see fig. 1). It is recommended to use proper sizedhooks and ropes, according to the weight. It is also possible to hook and lift the vessel by thebearing legs.4.3. Placing & commissioningPlace the unit according to the available room of the site and the required room for currentmaintenance and service of the equipment. See the dimensional drawing.• Place the column of media filter on a perfectly flat surface. See the dimensional drawingconcerning the placing of the unit according to the walls of the site and required room formaintenance and service. The shown scheme is only suggested; the column can be placedin different positions; according to the inlet/outlet connections on the valve groups.• Fix the valves manifold to the vessel (see installation drawing)• Fix the control board to the valves manifold-DUAL arrangements only :• Repeat the same operations for both columns; yet, the control panel is only one for bothcolumns and must be fixed on column A (see installation drawing).GOLFARIHOOKINGGAMBE DI SOSTEGNOLEGSCAUTION : DO NOT LIFT OR MOVE THE UNIT HOOKING ORCATCHING BY THE PRE-ASSEMBLED PARTS. |
Related manuals for Nobel FACD 05
manualsdatabase
Your AI-powered manual search engine