too dark images and blurry images. Increasing thelight sensitivity may also increase the image noise.— Adjust contrast (images only). Adjust thedifference between the lightest and darkest partsof the image.— Adjust sharpness (images only).The screen display changes to match the settingsyou define.The capture settings are shooting-mode specific.Switching between the modes does not reset thedefined settings.If you select a new scene, the capture settings arereplaced by the selected scene. You can change thecapture settings after selecting a scene if needed.Saving the captured image may take longer if youchange the zoom, lighting, or colour settings.Capture imagesWhen capturing an image, note the following:● Use both hands to keep the camera still.● The quality of a digitally zoomed image is lowerthan that of a non-zoomed image.● The camera goes into battery saving mode ifthere are no actions for about a minute. Tocontinue capturing images, select Continue.● Keep a safe distance when using the flash. Do notuse the flash on people or animals at close range.Do not cover the flash while taking a picture.To capture an image with the main camera, do thefollowing:1. To switch from video mode to image mode, ifnecessary, select > .2. To capture an image, press the capture key. Donot move the device before the image is savedand the final image displayed.Capture images with secondary camera — Tocapture an image, select . Do not move the devicebefore the image is saved and the final imagedisplayed.To zoom in or out when capturing an image, use thezoom slider.To leave the camera open in the background anduse other applications, press the menu key. Toreturn to the camera, press and hold the capturekey.On-screen controls and indicatorsfor still image captureThe still image viewfinder displays the following:107 Camera
