and return to the scenes list, select Back. To activateyour own scene, select User defined > Select.Capture images in a sequenceSelect Menu > Applications > Camera.Sequence mode is available only in the maincamera.To start capturing images in a quick sequence,select > Sequence. To close the settingswindow, select . Press and hold the capture key.The device captures images until you select Stop oruntil the memory runs out.The captured images are displayed in a grid. To viewan image, select the image. To return to thesequence mode viewfinder, press the capture key.You can also use sequence mode with the self-timer.To deactivate sequence mode, select > Singleshot.You in the image — self-timerUse the self-timer to delay the capture so that youcan include yourself in the image.To set the self-timer delay, select > , and thedelay needed before the image is captured.To activate the self-timer, select Activate. Thestopwatch icon on the screen blinks and theremaining time is displayed when the timer isrunning. The camera captures the image after theselected delay elapses.To switch off the self-timer, select > > .Tip: Select 2 seconds to keep your handsteady when capturing an image.Video recordingRecord videos1. To switch from image mode to video mode, ifnecessary, select and video mode .2. To start recording, press the capture key or select. A red record icon is displayed.3. To pause recording at any time, select Pause. Toresume, select Continue. If you pause recordingand do not press any key within one minute, therecording stops.To zoom in or out of the subject, use the zoomkeys.4. To stop recording, press the capture key. Thevideo clip is automatically saved in Photos.Video recording on-screencontrols and indicatorsThe video viewfinder displays the following:110 Camera
