Software updates using your PCNokia Software Updater is a PC application thatenables you to update your device software. Toupdate your device software, you need acompatible PC, broadband internet access, and acompatible USB data cable to connect your deviceto the PC.To get more information, to check the release notesfor the latest software versions, and to downloadthe Nokia Software Updater application, seewww.nokia-asia.com/softwareupdate or your localNokia website.To update the device software, do the following:1. Download and install the Nokia SoftwareUpdater application to your PC.2. Connect your device to the PC using a USB datacable, and select PC Suite mode.3. Open the Nokia Software Updater application.The Nokia Software Updater application guidesyou to back up your files, update the software,and restore your files.SettingsYour device normally has MMS, GPRS, streaming, andmobile internet settings automatically configured,based on your network service providerinformation. You may have settings from yourservice providers already installed in your device, oryou may receive or request the settings from thenetwork service providers as a special message.You can change the general settings in your device,such as language, standby mode, display, andkeypad lock settings.Access codesIf you forget any of the access codes, contact yourservice provider.● Personal identification number (PIN) code — Thiscode protects your SIM card againstunauthorised use. The PIN code (4 to 8 digits) isusually supplied with the SIM card. After threeconsecutive incorrect PIN code entries, the codeis blocked, and you need the PUK code to unblockit.● UPIN code — This code may be supplied with theUSIM card. The USIM card is an enhanced versionof the SIM card and is supported by UMTS mobilephones.● PIN2 code — This code (4 to 8 digits) is suppliedwith some SIM cards, and is required to accesssome functions in your device.● Lock code (also known as security code) — Thelock code helps you to protect your deviceagainst unauthorised use. The preset code is12345. You can create and change the code, and 13 Find help
