M e s s a g e s34Listen to voice messagesAfter you set up voice mail, in the standby mode, press and hold 1; or selectMenu > Messages > Voice messages > Listen to voice messages to dial the voicemailbox number. When you connect and the prerecorded greeting begins, followthe automated instructions to listen to your voice messages.Automate voice mailYou can insert special characters called dialing codes into phone numbers suchas voice mail, and save the number to a 1-touch dialing location. Dialing codesinstruct the receiving system to pause, wait, bypass, or accept the numbers thatfollow them in the dialing string. See "Phone numbers with dialing codes," p. 34.Voice mail services vary by wireless service provider. The following instructionsare examples of common operations. Please check with your wireless serviceprovider for specific instructions on using your voice mail service.Write down voice mailbox number and process1. Write down your voice mailbox number.2. Call and check your voice mail as you normally would.3. Write down your interaction with the recorded prompts step-by-step. Keep inmind that each voice mail service may vary. However, it should look similar tothe following:Dial 8585551212, pause 5 seconds, press 1, pause 2 seconds, press 1234,and press #.Phone numbers with dialing codesDialing codes instruct the receiving system to pause, wait, bypass, or acceptthe numbers that follow them in the dialing string. To set up dialing codes,do the following:1. In the standby mode, select Menu > Contacts > 1-touch dialing.2. Scroll to an (empty) 1-touch dialing slot, and select Assign.3. Enter your mailbox phone number, including the area code.4. Enter any dialing codes as necessary after the entered phone number.For example, if you pause for 5 seconds after connecting to voice mail, enter ptwice (two times 2.5 seconds) after the voice mailbox number: 2145551212pp.5. Enter any remaining pauses or other information that enables you to listen toyour messages, and select OK.6. Enter a name (such as voice mail), and select OK.To dial and listen to your voice mail, press and hold the assigned 1-touch dialingkey in the standby mode.
