S e t t i n g s603. If necessary, select an option associated with that function.4. Select Start, and speak the voice tag clearly into the microphone. Do notselect Quit unless you want to cancel the recording.The device replays and saves the recorded tag. appears next to commandswith voice tags assigned.Activate a voice commandAfter you have associated a voice tag with a function in your device, to issue acommand, speak the voice tag.1. In the standby mode, press and hold the right selection key or voice key.2. With Speak now displayed, pronounce the voice tag clearly into the microphone.With the voice tag found, the device displays Found:, and plays the recognizedvoice tag through the earpiece. The function you requested is activated.OptionsAfter you have associated a voice tag to a command, you can select one of thefollowing options:Playback—Listen to the voice command tag.Change—Change the voice command.Delete—Erase the voice command tag.■ Enhancement settingsThe enhancement settings menu is shown only if the device has been connectedto a compatible enhancement. In the standby mode, select Menu > Settings >Enhance-ments > Headset, TTY/TDD, or Charger.HeadsetImportant: The headset may affect your ability to hear sounds aroundyou. Do not use the headset in situations that may endanger your safety.Select the option of your choice to enter the submenu and modify its settings.Default profile—Choose the profile you want automatically activated with aheadset connected.Automatic answer—Answer calls automatically after one ring with a headsetconnected. Select On or Off.
