O r g a n i z e r73Set the timer1. In the standby mode, select Menu > Organizer > Timer > Normal timer,Interval timer, or Settings.Use Normal timer to measure the countdown time for tasks that have oneperiod (timer name). Select Interval timer to save sets of countdown timeswith more than one period.2. Enter the time (in hh:mm:ss format), and select OK.3. Enter a note for the timer, and select Start.appears in the standby mode with the countdown timer set. When the timeruns out, your device sounds an alarm, displays the timer note, vibrates (if set),and flashes its lights.Press any key during the alarm to stop the alarm. After 1 minute the timer alertstops automatically.Change the timeAfter you have set the timer, you can change the time.1. With a normal timer set, in the standby mode, select Menu > Organizer >Timer > Change time.2. Enter the new time, and select OK.3. Leave the note as it was, or enter a new note, and select Start.Interrupt the timerAfter you have set the timer, you can stop the timer. In the standby mode, selectMenu > Organizer > Timer > Stop timer.■ StopwatchYou can use the stopwatch in your device to track time. The stopwatch displaystime in hours, minutes, seconds, and fractions of a second in hh:mm:ss.ss format.Using the stopwatch or allowing it to run in the background when using otherfeatures increases the demand on battery power and reduces the battery life.Measure time1. In the standby mode, select Menu > Organizer > Stopwatch > Split timing orLap timing > Start. The running time is displayed.Split timing—You can use the split time function for such things as a longdistance race when you need to pace yourself. Select Split to note the lapsedtime. The timer continues to run and the split time appears below the runningtime. Each time you select Split, the new measured time appears at thebeginning of the list.
