S e t t i n g s53Copyright © 2005 Nokia. All rights reserved.Start-up toneYou can select to have a start-up tonewhen you first turn on your device.In standby mode, select Menu >Settings > Phone > Start-up tone >On or Off.Help text activationYour device displays brief descriptionsfor most menu items. When you arriveat a feature or menu, pause for about14 seconds and wait for the help textto display. If necessary, use the scrollkey to page through the full help text.The default setting for help text is On.However, you can turn help text on oroff. In standby mode, select Menu >Settings > Phone > Help textactivation > On or Off.■ Voice commandsBefore using voice tags, note thefollowing:• Voice tags are not language-dependent, but depend on thespeaker’s voice.• You must say the name exactly asyou said it when you recorded it.• Voice tags are sensitive tobackground noise. Record voicetags, and use them in a quietenvironment.• Very short names are not accepted.Use long names, and avoid similarnames for different numbers.Note: Using voice tags may bedifficult in a noisyenvironment or during anemergency, so you should notrely on voice dialling in allcircumstances.Hands-free operationYou can set as many as 16 voicecommands to enable hands-freeoperation of certain features in yourdevice.Assign a voice tag to acommandBefore using voice commands, youmust first add a voice tag to the devicefunction.1. In standby mode, select Menu >Settings > Voice commands.2. Select the device function youwant to tag: Profiles, Voicemailbox, Radio, Voice recorder, orCall register.3. If necessary, select an optionassociated with that function.4. Select Start, and speak the voicetag clearly into the microphone.Do not select Quit unless you wantto cancel the recording.The device replays and saves therecorded tag. appears next tocommands with voice tags assigned.