28 Copyright © 2004 Nokia4 Speak clearly into the microphone.Note: Do not press Quit unless you want to cancel the recording.The phone automatically stops recording and then saves and replays the voice tag.Voice tag errorsIf recording is not successful, you may see one of the following error message:Voice too quiet, try again?Voice tag too long, try again?Voice tag too short, try again?Select OK to try again.Dial a number using voice dialing1 At the start screen, select and hold Contacts.ORWith the optional headset attached, press and hold the headset button.2 When you hear several beeps and Please speak now appears, release the button.3 Pronounce the voice tag clearly into the microphone.When the phone finds the voice tag, the phone automatically dials the number.If the phone does not locate a number, you hear an error tone andNo match found appears. To start voice dialing again, select and holdContacts (or the headset button) immediately after the error tone.Play back a voice tag1 At the start screen, select Contacts > Voice tags and the name with the voicetag you want to hear.2 Select Options > Playback.Change a voice tag1 At the start screen, select Contacts > Voice tags and the name with the voicetag you want to change.2 Select Options > Change.The phone displays Press Start; then speak after tone.3 Select Start and pronounce the new voice tag.The phone repeats your voice tag, and Voice tag saved appears.