Nokia 3520 and Nokia 3560 User Guide 31 Copyright © 2004 NokiaAdvanced calling featuresActivate a voice commandAfter you have associated a voice tag with a phone function, you can issue a commandby speaking the voice tag. There are two ways to activate a voice command:1 With the optional headset attached, press and hold the headset button.ORAt the start screen, select and hold Contacts.2 When Please speak now appears, pronounce the voice tag clearly intothe microphone.Work with a voice command tagYou can play back, change, or delete an existing voice command tag.1 From the menus, select Voice > Voice commands and the desired tag.2 Select Options and one of the following:Playback—Listen to the tag.Change—Change the tag. Select Start and speak the new tag clearly intothe microphone.Delete—Delete the tag.• SEND YOUR OWN NUMBER IN CALLER IDWith each call you place, you can determine whether your telephone numberappears on the caller ID of another phone.In most service areas, when you call others, your name is presented to their callerID (if they subscribe). With Send own caller ID, you can block or send the displayof your number when you make a call.Note: Send own caller ID when calling might not be available in yourwireless system. Contact your service provider for details and availability.Also note that this feature is effective only when you call a number that isequipped with caller ID.Before you can use Send own caller ID when calling, you must first store itsfeature code. Otherwise, this feature might not appear on the phone menu.Store the feature code1 From the menus, select Settings > Network services > Network feature setting.2 At the Feature code prompt, enter the feature code from your service providerand select OK > Send own caller ID when calling > Yes.