36Start-up tone > On — the phone plays a tone when switched onSwitch-off tone > On — the phone plays a tone when switched offFold close handling > Go to standby — the phone goes to standby mode when it is closedFlight query > On — the phone asks whether to use the flight profile every time whenswitched on. With flight profile all radio connections are switched off. The flight profileshould be used in areas sensitive to radio emissions.■ EnhancementsThis menu or the following options are shown only if the phone is, or has been, connected toa compatible mobile enhancement.Select Menu > Settings > Enhancements. Select an enhancement, and depending on theenhancement, from the following options:Default profile — to select the profile that you want to be automatically activated when youconnect to the selected enhancementAutomatic answer — to set the phone to answer an incoming call automatically after 5seconds. If Incoming call alert is set to Beep once or Off, automatic answer is off.Lights — to set the lights permanently On. Select Automatic to set the lights to stay on for15 seconds after a key press.If your phone is provided with a hearing aid coil select Hearing aid > T-coil hrng. aid mode >On to optimize the sound quality when using a t-coil hearing aid. is shown when theT-coil hrng. aid mode is active.■ ConfigurationYou can configure your phone with settings required for certain services to functioncorrectly. Your service provider may also send you these settings. See "Configuration settingsservice," p. 9.Select Menu > Settings > Configuration and from the following options:Default configuration setting — to view the service providers saved in the phone. To setthe configuration settings of the service provider as default settings, select Options >Set as default.Activate default in all applications — to activate the default configuration settings forsupported applicationsPreferred access point — to view the saved access points. Scroll to an access point, and selectOptions > Details to view the name of the service provider, data bearer, and packet dataaccess point or GSM dial-up number.Connect to service provider support — to download the configuration settings from yourservice provider