131. Connect the charger to a wall socket.2. Connect the charger to your phone.3. When the battery is fully charged, disconnect thecharger from the phone, then from the wall outlet.■ Switch the phone on and off1. Press and hold the power key.2. If the phone asks for a PIN code, enter the code (for example,displayed as ****), and select OK.When you switch on your phone for the first time, and the phone is inthe standby mode, you are asked to get the configuration settings fromyour service provider. Confirm or decline the query. See “Configuration‚"p. 36, and “Configuration settings service‚" p. 10.■ Set the time, zone, and dateWhen you switch on your phone for the first time, and the phone is in the standby mode, youare asked to set the time and date. Fill in the fields, and select Save.To change the time and date settings, select Menu > Settings > Date and time > Date &time settings, Date and time format, or Auto-update of time (network service).■ AntennaYour device may have internal and external antennas. As withany radio transmitting device, avoid touching the antenna areaunnecessarily while the antenna is transmitting or receiving.Contact with such an antenna affects the communicationquality and may cause the device to operate at a higher powerlevel than otherwise needed and may reduce the battery life.
